Introduction
WanBlend® CA1450 ABS engineering plastics that is PC + ABS (engineering plastics alloy), the Chinese name in the chemical industry called plastic alloys, the reason why named PC + ABS, because this material has both the excellent heat and weather resistance of PC resin, dimensional stability and impact resistance, but also has the excellent processing of ABS resin fluidity. So the application of thin-walled and complex shape products, can maintain its excellent performance, as well as to maintain the plastic and an ester composition of the material's molding. the biggest disadvantage of ABS engineering plastics is the heavy mass, thermal conductivity is not good. Its molding temperature is taken between the temperature of their two raw materials, that is, 240-265 degrees, the temperature is too high ABS will decompose, too low PC material flowability is poor.
Parameters
| Physical | Test Method | Data | Unit |
| Density 23℃ | ASTM D792 | 1.11 | g/m3 |
| Shrinkage rate Flow 2.00mm | ASTM D995 | 0.5-0.7 | % |
| Melt Index 260℃ 5kg | ASTM D1238 | 12 | g/10min |
| Thermal performance | Test Method | Data | Unit |
| Heat distortion temperature 1.8MPa 120℃/hr | ASTM D648 | 93 | ℃ |
Material properties
High liquidity
General grade
Parameters
Minimum Order Quantity: | 25kg |
Price: | $1.8-$3.2 |
Packaging Details: | 25kg/bag |
Delivery Time: | 3-5 working days to departure port |
Payment Terms: | TT/LC |
Supply Ability: | 1000MT/Month |
Sales consultant
